manualshive.com logo in svg

Ironton 30746, Owner'S Manual, Page: 8 / 50

Share
Download
Ironton 30746 Owner'S Manual Download Page 8

 

 

8 

 

Warning Label Location 

 

WARNING

 

 

READ and UNDERSTAND the Owner's Manual completely before using this sprayer

.  

Assemble, test, and use only in accordance with the Owner's Manual instructions. 

 

READ and FOLLOW chemical label instructions.

  Pesticides are hazardous chemicals which 

must be handled carefully.  

 

KNOW emergency procedures BEFORE handling chemicals.

  Sprayer leaks, bodily chemical 

contact, poisoning, and spills require immediate response.  

 

AVOID inhaling, ingesting, or coming into contact with any chemicals.

  

 

EXERCISE CAUTION in vehicle handling.  

Vehicle will be less stable and handle very 

differently with filled sprayer attached.  

 

DO NOT TURN ON POWER to sprayer until ready to spray

 in order to avoid unintentional 

spray release.  

 

Improper use of the sprayer or handling of chemicals could result in serious injury or illness 
to the operator or nearby persons/animals, or could cause damage to the environment. 

 

 

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 
 
 
 

Always make sure safety labels are in place and in good condition.  

If a safety label is missing or not 

legible, order new labels or unsafe operation could result. 

To order replacement safety labels

, call Ironton Product Support at

 1-877-234-6869.

 

 

Part# 

Description 

777499  Chemical Label 

790868  Pump Label 

Summary of Contents for 30746



















































Reviews:

No comments