2
Congratulations on your purchase of this fine Ironmaster product. The following instructions will help you assemble
the unit and provide some details on use as well. The only tools required are two adjustable wrenches. Unpack all
the parts and make sure you have received all the parts as shown on the exploded view drawing and parts list. If you
are missing anything or need anything, please call Ironmaster for assistance. 800-533-3339.
Step 1: Assemble BASE LEGS #4 and BASE
CENTER #5 using bolts #16 with washers #19
and nuts #17. Also install the 4 rubber FOOT
PADS #18 on the BASE LEGS.
Step 2: Assemble SPINE #11 to BASE CENTER
using 3 bolts #16 with washers #19 and nuts #17.
Step 3: Assemble 4 STORAGE BARS #10 to
SPINE #11 using bolt #14 and washer #15 as
shown.
1
2
Step 4: Install 8 OLYMPIC ADAPTER #23 using set
screws with the small Allen wrench to secure. Push on
RUBBER RINGS #24 over the adapters. Put one ring per
side on the upper three positions and put two rings per
side on the bottom position.
If Olympic Weights will not be
used on the unit you can skip this step.
3
Spine
Storage Bar
Olympic Adapter
Rubber rings
Base Legs
Note: Brackets
open to front
Base Center
4
