Page 3 of 6
9. Using thred lock, screw all mounting studs into
snorkel body and attach pillar mounting bracket
loosely to snorkel using M6 Bolts provied.
7. De-burr and rust-proof all holes (this applies to
all holes drilled after this step).
10. Apply masking tape to left hand front windscreen
pillar. Hold snorkel body in position on front
mudguard and mark location of mounting
holes through pillar bracket onto pillar (edge
of mounting bracket should be in line with the
crease on pillar).
8. Open left hand front door and carefully remove
front section of door rubber and plastic trim from
windscreen pillar.
11. Remove snorkel body and remove pillar bracket
from snorkel.
