Ironman Fitness H-Class 610, Owner'S Manual

Page: 15 / 35

4. Assemble Handlebar
Use the Allen Wrench to remove two Bolts (115) and two Curve Washers (38) from the
Front Post (4). Attach the Handlebar (5) to the Front Post (4), and then tighten the two Bolts (115)
and two Curve Washers (38). Make sure it’s secure.
Bottle Holder Installation.
Remove two Bolts (103) on the Front Post (4). Attach the Bottle Holder (104) onto the
Front Post, then tighten the two Bolts (103) with the Allen Wrench.
ASSEMBLY
106
4
15
Multi Hex Tool with
Phillips Screwdriver
Tool:
12
Pulse Wire
98
3. Computer Installation
Remove the four Bolts (98) from the back of the computer
Remove the Wire Plug (106) from Front Post (4)
CAREFULLY insert the Computer Wire (12) into the 9-pin socket on the computer and run
the Pulse Wire through the top plate and out the side hole on the Front Post (4).
CAUTION: To prevent damage, ensure the wires are NOT folded or pinched during installation.
Attach the computer onto the Front Post using Bolts (98)
Allen Wrench 5mm
1 PCS