Ironman Fitness ACCLAIM Owner'S Manual Download Page 33 | Manualshive

Page: 33 / 44

Ironman Fitness ACCLAIM Owner'S Manual Download Page 33

Treadmill Error Messages

Your treadmill is equipped with a software package that enables error messages to be displayed when there is a problem. The following error
codes will be displayed in the console display windows.

Safety Interlock Error Messages

SI 1

- Safety key missing, replace and try again.

SI 2

- over voltage protection trip. Notify Ironman Fitness Customer Service.

Other Error Messages

E11

-

Lack of speed feedback data from belt motor. Attempt calibration. See Calibration Sequence section on

page 32

of this owners Manual for

detailed information.

E22

- Under Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence section for detailed information.

E33

- over Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence section for detailed information.

E44

- Stuck key detected at power up, Notify Ironman Fitness Customer Service.

E66

- Will blink on the incline window to indicate that treadmill belt needs to be re-lubricated. This message will be repeated every 30 hours.

To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill until the problem is corrected. Call
Keys Customer Service at (800)-750-4766.

Clearing E66 Message

once the belt has been properly lubricated (See maintenance instruction on page 35). You can clear the

E66

treadmill belt lubrication reminder

with the following steps:
1. Unplug power cord from outlet strip.
2. Attach safety key to console.
3. Plug power cord into outlet strip.
4. Press the (Speed +, Speed -, and Pause) keys simultaneously, then you will hear a beep.
5. The message e66 appears in the incline window and the number 30 appears in the speed window.
6. Press the Speed + and the Speed - and pause keys simultaneously for 4 seconds, then you will hear a beep.
7. The characters “---” will appear in the incline/speed window, flashing for 3 seconds.
8. The console turns off after operation is completed.

Error code

www.ironmanfitness.com

33

«
...
31
32
33
34
35
...
»

Summary of Contents for ACCLAIM













































Reviews:

No comments