Ste
Har
NO. 3
M1
ep 1
rdware:
36 Carriag
0x55 4P
e bolt
PC
Noo. 35Cap n
4PC
Too
ut M10
ol:
NO.
10x19
. 37 Washe
9x1.5T 4 PC
er
CS
Y
L
B
M
E
S
S
A
11
Place a block of styrofoam underneath the Main Frame (1) for easier installation. Attach the
Front Stabilizer (2) to the Main Frame by aligning the bolt holes and installing two Carriage
Bolts (36), two Washers (37) and two Cap Nuts (35) as shown below.
Tighten the Cap Nuts (35) with the 17mm Wrench Provided.
Install the Rear Stabilizer (3) to the Main Frame (1) using the same method as above.
Open End Wrench 14,17MM 1PCS
