D-17
D-17
C-2
A-2
A-2-1
C-5
A-3
A-1
U-1
N-7
D-17
C-5
C-2
C
N-6
N-8
D-17
C-5
C-2
N-7
7A. Seat Handlebar installation
Attach the Seat Handlebar (C) with two Allen bolts (N-6) and two Curved Washers (N-8) tighten
using the 6mm Allen Wrench (N-12). Slide the Hand Pulse cable (C-2) UNDER the Seat
Adjustment bracket (G-1), then connect Hand Pulse Cable (C-2) and Upper hand pulse cable
(D-17) see Pic (A-1).
Gently rotate the attached cable so it fits through the slot (see Pic. A-2-1) then insert the Cable
Plug (C-5) into the hole, (see Pic. A-3.)
Assemble Adjustable handle (U-1) with two Screws (N-7) using the 5mm Allen Wrench (N-15).
N-7 Screw
M6x1x10L
2PCS
N-8 Curved Washer
D22xD8.5x1.5T
2PCS
N-6 Allen Bolt
M8x1.25x50L
2PCS
16
ASSEMBLY
Hardware:
Tool:
N-12 Allen Wrench with
Phillips Screwdriver
6mm 1PC
N-15 Allen Wrench
5mm 1PC
