The product weighs more than 44lbs/20kgs and should
be assembled and moved by two or more people.
8
2
1
77
75
76
73
74
77
49
50
54
48
54
51
48
51
Step 1:
Stand up the base of the machine by separating the
Front and Rear
U-Frames (1, 2)
. Pull the
Front and Rear U-Frames (1, 2)
apart from each
other. Push down on the middle of the
Folding Arms (8)
until they are fully
locked down.
Attach each of the
Right & Left Foot Caps (49, 50)
to the
Front & Rear
U-Frame (1, 2)
with one
Screw (48)
, one
Screw (51)
, and two
Washers (54)
.
Tighten using the
Multi Hex Tool with Phillips Screwdriver
provided.
Attach
the
Rear Left Foot Cap with Handle I (73)
and
Rear Left Foot Cap
with Handle II (74)
to the left side of the
Rear U-Frame (2)
with four
Screws
(77)
. Attach the
Rear Right Foot Cap with Handle I (75)
and
Rear Right Foot
Cap with Handle II (76)
to the right side of the
Rear U-Frame (2)
with four
Screws (77)
. Then tighten using the
Multi Hex Tool with Phillips Screwdriver
provided.
Hardware:
ASSEMBLY
(54) Washer
4 PCS
(48) Bolt
2 PCS
(51) Bolt
2 PCS
10
(77) Screw
8PCS
Multi Hex Tool with
Phillips Screwdriver
Tool:
Summary of Contents for 5800
Page 5: ...LABEL PLACEMENT 3 ...
Page 8: ...OVERVIEW DRAWING 6 ...
Page 11: ...9 HARDWARE TOOLS PACK ...
