15
Step 8
Remove the Square End Cap (40) on the back of
square bracket of Adjustable Boom (3). Attach the
Adjustable Instep Frame (6) to the Adjustable Boom
(3) by inserting the Adjustable Instep Frame (6) into
the square bracket on the boom. Slide the
Adjustable Instep Frame (6) completely into the
square bracket, insert the M6x47 Hex Head Bolt (11)
with a Ø16xØ6.5x1.0 Washer (27) halfway through
the square bracket, slide the M6x47 Hex Head Bolt
(11) through the ring at the bottom of the Spring (22),
slide the M6x47 Hex Head Bolt (11) through the rest
of the square bracket, and secure at the other end
with a Ø16xØ6.5x1.0 Washer (27) and M6 Lock Nut
(16). Attach the Square End Cap (40) onto the back
of square bracket of Adjustable Boom (3) that was
removed.
Note:
To slide the Adjustable Instep Frame (6) into
the square frame, you must first pull out the “T” Type Spring Knob (35).
Hardware:
Tool:
2 Wrenches M12x14
1 Hex Head Bolt (M6x47)
2 Washers (Ø16xØ6.5x1.0)
1 Lock Nut (M6)
Summary of Contents for 5211
Page 5: ...4 WARNING LABEL PLACEMENT ...
Page 9: ...8 OVERVIEW DRAWING ...
