Ironman Fitness 5201, Owner'S Manual

Page: 21 / 28

19
The Pivot Arms (5) can be adjusted to allow for a greater or lesser degree of inversion.
To adjust the Pivot Arms (5) simply pull out on them until the post is out of the hole,
slide them up or down to the desired hole, push in until the post goes through the
desired hole, The bottom hole provides the least amount of inversion, while the top
hole provides the greatest amount, It is recommended that beginners use the bottom
hole until they are familiar with the inversion table.
NOTE: Both Pivot Arms (5) must be adjusted to the same hole. Trying to adjust the
Pivot Arms (5) on two different positions could cause damage to the inversion table, or
injury to the user.
OPERATION AND ADJUSTMENTS
Pivot arm is NOT aligned correctly.
The pivot arm is not inserted all the
way into the curved slot.
Make sure the pivot arm is inserted
all the way into the slot. Pivot arm is
aligned correctly when the groove
sits directly on the curved slot and
the pivot arm is able to rotate freely.
WARNING: Make sure both pivot arms are in the same hole to prevent
serious injury from occurring.