QUICK START / MANUAL MODE
1. Plug into a surge protector outlet. Attach the
Safety Key
on to the treadmill console.
2. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
3. Press POWER button. There will be an eight (8) second delay after pressing the POWER button before data
can be entered. The TIME window will flash.
4. Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt starts
moving. Speed or incline may be adjusted by using the appro (increase) or – (decrease) button.
5. To end your workout, press START/STOP button. Belt will gradually slow to zero.
6. To pause your workout, press PAUSE.
7. To re-start after pausing: Press the PAUSE button.
WARNING: THE TREADMILL BELT WILL
RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
8. Countdown Time, Preset Speed and/or Incline: Time, Speed, and Incline may be preset prior to getting
started. First, press the POWER button, then press the ENTER button, the time window will blink. Use the
SPEED + or – buttons to select your workout time, then press the ENTER PROGRAM button. The
SPEED window will now be flashing. Using the same + or – arrows, select the speed for your workout,
then press ENTER PROGRAM. Now the INCLINE window will be flashing. Use the I or –
buttons to set your workout incline, then press ENTER PROGRAM. To start, press the START/STOP but-
ton.
USING THE FAN
There are 3 different fan speeds to choose from
MEDIUM, HIGH,
and,
STOP.
To set the desired fan
speed press the
FAN
button.
Program and Operation
14
START / STOP
INCLINE
PAUSE
ENTER
FAN
FAN SELECTION LED
POWER
SPEED / TIME
Summary of Contents for 220t
Page 25: ...Exploded View 25 ...
Page 26: ...Exploded View 26 CONSOLE ASSEMBLY WIRE HARNESS ...
