IronCraft BPF Series, Operation Manual

Page: 3 / 44

SHREDDER - BPF Series
Congratulation for purchasing your new Iron Craft wedder!
This machine has been designed and manufactured following all safety and quafity requirements needed
for a safe and satisfactory use
over
time.
A careful reading of this manual will permtt you to familiarize with your new equipment, and will provide
you all the tools needed to use it safely.
A proper maintenance and knowledge of the safety rules of use will allow to obtain the best performance
and a long service life of the machine.
The Safety Alert Symbol used throughout this manual and on safety decals of the
madline indicates the presen<le of potential hazard to the operator. When you see
this symbol, be alert and carefu lly read the message that follows it •
•
The Safety Alert Symbol is used in conjunction with following Signal words, according to the
degree of possible injl.lies that may result operating the implement:
&
DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in death
Of
serious injury.
&
wARNlNG
Indicates a potentially hazardous situation that,
if not
avoided, could result in death
or
serious injury, and
includes hazards that are exposed when guards are removed. It may aJso be used
to
alert against unsafe
practices.
&
CAUTION
Indicates a potentially hazardous situation that,
if
not avoided, may result in minor or moderate injury, It
may also be used to alert against unsafe practices.
IMPORTANT
Indicates instructions or procedUfes
that, if
not
observed,
can cause damage to equipment or environment.
NOTE
Indicates helpful information.
READ, UNDERSTAND, and FOLLOW the safety messages following the Safety Alert Symbol and Signal
Words_ Failure to comply with safety messages could result in serious bodily injury or death.
3