Assembly Procedure
Some components are very heavy
and can be damaged if mis-handled.
Also, to help prevent personal injury,
it is strongly recommended that two
(2) people work together to uncrate
and assemble the log splitter.
1.
Remove and read the instructions
and safety recommendations before
assembling or operating this log
splitter.
2. Remove the base unit from the pallet
using two people or a lifting device.
3. Attach the wheels to the base unit using
four lug nuts each.
CAUTION
Unpacking the Crate
1. Cut the metal banding and remove the top,
sides, ends, and protective plastic cover-
ing of the packing crate. Do not remove
the base unit or the rail assembly from the
bottom pallet at this time.
2. Carefully check the larger components on
the shipping pallet for damage. If the parts
are damaged call Iron & Oak Products at
(815) 672-8596.
3. Cut all the banding straps, open the card-
board box, and make sure all the smaller
parts have been shipped. The chart in the
“Shipping List” section provides a com-
plete list of all the parts shipped with your
log splitter. If any parts are missing call
Iron & Oak Products at (815) 672-8596.
NOTE: The contents of the cardboard box
contains the hitch assembly, two safety
chains, two fenders, and a filter element.
Also, included in the box is a plastic bag of
miscellaneous hardware and a plastic bag
with the valve handle, knob, valve link, clevis
pins, and cotter pins.
Iron & Oak
10
815-672-8596
815-672-8596
11
Iron & Oak
