Iron & Oak BHH2013GX Owner'S Manual Download Page 4 | Manualshive

Page: 4 / 50

background image

4

About Your Log Splitter

Thank you for purchasing your Iron & Oak log splitter!

About Your Log Splitter:

This log splitter is a machine designed to split wood logs using a hydraulically powered moving

ram

.

The log splitter's gasoline engine is used to pressurize the hydraulic system

.

This log splitter is designed to split logs

lengthwise with the grain only.

This log splitter model is capable of splitting logs up to 24” long and 18” in diameter.

Your splitter can be used in the horizontal splitting position only:



When the splitter is set up to operate in the horizontal splitting position, a log is placed on the
horizontal beam and the

ram

moves horizontally into the end of the log to split it.

The technical specifications for your log splitter are provided in the Specifications section of this manual.

WARNING

This log splitter uses a high-pressure hydraulic system to generate a very strong splitting
force.

Read the manual completely

before using the machine to understand how to safely operate

and maintain it.

Follow all safety precautions presented throughout this manual. A summary of important safety
information can be found at the end of this manual.

Contact Iron & Oak Product Support at 1-800-817-1005 for any questions about the appropriate
use of this log splitter and/or optional accessories.

Warranty Registration:

Please fill out and submit the warranty registration card so that we have your contact information for any
future product literature or replacement parts you may need.

Attention: All Rental Companies and Private Owners who loan this

equipment to others!

All persons to whom you rent/loan the log splitter must have access to and read this manual. Keep this owner's
manual with the splitter at all times and advise all persons who will operate the machine to read it. You must
provide instruction on how to safely operate the splitter and remain available to answer any questions a
renter/borrower might have.

«
...
2
3
4
5
6
...
»

Summary of Contents for BHH2013GX



















































Reviews:

No comments

Related manuals for BHH2013GX

Brand: Wallenstein Pages: 40

Brand: The Handy Pages: 28

Brand: DOSKO Pages: 40

Brand: EINHELL Pages: 276

ATIKA ASP 4 N-2

Brand: Altrad Pages: 6

Brand: MTD Pages: 12

Brand: MTD Pages: 15

Brand: MTD Pages: 16

Brand: MTD Pages: 20

Brand: MTD Pages: 20

Brand: Scheppach Pages: 224

Brand: BGU Pages: 24

Brand: BGU Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands