IGNITION WARNINGS
8
9
TEMPERATURE ADJUSTMENT
• Do not touch Tip, Tip Housing or Knurled Nut while igniting. (Fig. 4)
• Do not ignite torch when Tip Assembly is not screwed on. (Fig. 5)
• The tip temperature can be adjusted by turning the
ON/OFF Gas
Control Lever
left or right. (Fig. 6)
• Set to mid-position when soldering or brazing.
• Excessive gas flow, flare-up or catalyst pulsing red may occur
when the
Gas Control Lever
is set too high.
Fig.4
Fig.5
Fig.6
Summary of Contents for SOLDERPRO 50K
Page 9: ...www pro iroda com ...