8
9
• Do not touch Tip, Tip Housing or Knurled Nut while igniting. (Fig. 4)
• Do not ignite torch when Tip Assembly is not screwed on. (Fig. 5)
• The tip temperature can be adjusted by turning
the
Gas Control Lever
left or right. (Fig. 6)
• Set to
mid-position
when soldering or
brazing.
• Excessive gas flow, flare-up or catalyst pulsing
red may occur when the
Gas Control Lever
is
set too high.
Fig.4
Fig.5
Fig.6
Mid-Position
IGNITION WARNINGS
TEMPERATURE ADJUSTMENT
