iRobot Scooba Owner’s Manual
global.irobot.com
Scooba Essential Maintenance
To keep Scooba running at peak performance, perform the following
maintenance tasks after every cleaning cycle.
Rinse and Empty Scooba’s Tank
Scooba puts down fl uid from the CLEAN tank and collects dirty solution
into the DIRTY tank. Empty and rinse both tanks after every cleaning cycle.
or Dirty tanks.
Rinse Scooba’s Filter and Vacuum Port
1
2
3
Run water into the
back openings.
Empty tanks and partially
refi ll tanks with warm water.
Vigorously shake the tank and
empty through all openings.
1
2
3
Remove fi lter.
Rinse under water.
Replace item. Do not force.
1
2
3
Remove vacuum port.
Rinse under water.
Replace item. Do not force.
Clean Scooba’s Cleaning Head and Brush
Scooba’s brush is located inside a cartridge called the ‘cleaning head’.
Access to the cleaning head is inside Scooba, so the tank needs to be
removed when removing and replacing the cleaning head.
1
With the tank removed, push eject
button to remove the cleaning head.
2
3
Rinse the cleaning head and brush
under water.
4
Ensure the tank is removed before
replacing the cleaning head. The
cleaning head will click into place.
Open the cleaning head by pushing
the tabs in opposite directions, then
remove the brush.
X Incorrect
D
Correct
CAUTION: Scooba contains electronic components that can be
damaged by spills of water or other liquids. Clean the bottom and top
of Scooba with a damp cloth only. Do not pour or spray water onto
Scooba, other than into the Clean or Dirty tanks.
5
6
