global.irobot.com
EN
how to get started
Charge scooba
set up scooba
ready to go
empty and Clean scooba
1
first, sweep up large debris and
remove clutter and lightweight
rugs from area to be cleaned.
2
Place scooba on the floor
and press the power button
to turn on scooba.
3
Press and release the
Clean button to begin
the full cleaning cycle.
for short cycle, press
and hold until second
song starts.
1
before using scooba
for the first time, insert
the included battery.
2
Place scooba on the storage
mat (to protect the brushes)
and plug in scooba.
3
Charge scooba until the green light
on the charger is solid. (up to 8 hours)
1
at the end of the cycle, empty
and thoroughly rinse both tanks
with water.
2
remove bottom plate. rinse and remove
all debris from brushes and squeegee.
3
Clear any debris on scooba before
replacing bottom plate. if necessary,
remove and replace tires.
1
slowly add warm
water into fill port.
open both fill and
eMPtY ports so the
bladder can fully
expand.
ensure the charger jack
door is closed.
2
add scooba hard
floor Cleaner.
(1 packet or 1/2 capful)
3
firmly close
fill and
eMPtY ports
until sealed.
2