CAUTION!
Use only the AC Power Adapter supplied with the player.
The AC operating voltage of this player is 100~240V, 50~60Hz.
Connect the Adapter to 4.5V DC jack on the player and AC outlet.
Disconnect Adapter when not in use.
Do not handle this player or power cord when your hands are wet or
damp. If water or other liquid enters the case, take the player to an
authorized service center for inspection.
Using AC POWER ADAPTER
35
Automatically power off when charge
is done.
Charging time
- 1850mA rechargeable batteries :
Approx. 6.5 hours
(At full discharge)
The recharge function is available while the player has rechargeable batteries
installed and connected to AC power adapter.
The charging menu on the LCD is displayed when press and
hold the stop ( ) button during playback.
While in Charge Mode, long press of stop ( ) button turns the POWER OFF.
While in Charge Mode, long press of
button starts the playback after
stop charging.
Use the
,
button to move to charge
mode and click the STOP ( ) button to select
charge mode. The selected mode (CHARGE or
CANCEL) automatically begin charging after 1
minute passes without menu selection (when
plugged into AC adapter).
: The player is
under charging.
CHARGING screen is as follow
Recharging Method
34
CAUTION!
Charge with Ni-MH (Nickel Metal Hydride Battery) batteries only.
Do not mix rechargeable batteries with alkaline batteries.
Do not charge non-rechargeable batteries such as Alkaline.
It may cause leakage or explosion of the battery or malfunction.
Do not use batteries with the different capacity.
– it may not be charged properly
Install Rechargeable batteries. And press
button after connecting to
Adapter.
During CD playing or Tuner playing, long pressing of STOP ( ) button shifts
to charge mode.
Select Charge Mode
: The player is turned off
without charging.
Rechargeable batteries are optional.
iMP-700T : Included
iMP-700 : Optional
Summary of Contents for iMP-700 Series
Page 28: ...53 52...
