IRiver iGP-100, Instruction Manual

Page: 8 / 23

TO DISCONNECT THE PLAYER FROM THE HOST PC
Click the 'Safely Remove Hardware" icon in
the System Tray.
Click OK after confirming the “Safe To Remove Hardware” massage.
Disconnect the USB cable between the iGP and host PC.
Click “Stop iRiver iGP-100-Driver(X)” or “Safely Remove CORNICE Inc.
Storage-Drive(X:)”. (Where X is the drive letter assigned to the iGP)
Caution
Do not disconnect the player while the drive is in use.
Wait for any file copying to complete before disconnecting the iGP from
your computer."
12
Press the PLAY/STOP button to
turn on the player.
Press it again to play.
To select music
: To select previous track
: To select next track
Switch the HOLD button to "off".
To adjust the volume
:
To increase volume
:
To decrease volume
- When "Hold" is ON, the buttons on the
player will not function.
- When the player is stopped, it will shut off
according the "Stop Power Off" setting in
the Menu. (Refer to page 29.)
Connect the headphones as shown
below.
NOTE
13