ENGLISH
1. Gently insert a CD with the label side up into the CD slot of the
AK RIPPER MKII.
2. Press the Eject button to remove a CD from the AK RIPPER MKII.
Inserting/Ejecting a CD
The AK RIPPER MKII does not support CD playback.
Some noise may occur when inserting or ripping a CD depending on its condition.
Do not use excessive force when inserting a CD. Doing so may damage the product or CD.
Incorrectly inserting a CD may cause product malfunction or cause the CD to become stuck.
A damaged or dirty CD may cause problems.
Do not eject a CD while it is in use. Doing so may damage the product or CD.
CD Slot
micro-USB port for the AK380
Cradle and AK portable connection
Eject Button
Power Port (micro-USB port for
connecting a power supply)
AK RIPPER MKII
Micro 5pin
OTG cable
micro-USB Cable
Warranty & QSG
Type-C
OTG cable
AK RIPPER MKII at a Glance
Package Contents
The AK380 can be connected to the AK RIPPER MKII via the AK380 Cradle.
To use the AK RIPPER MKII, a dedicated adapter of 5V 2A or greater must be connected to the micro-
USB port. (If the AK380 Cradle is connected to a dedicated adapter of 5V 2A or greater,
a separate power supply does not need to be plugged into the AK RIPPER MKII.)
AK RIPPER MKII
QUICK START GUIDE
