IR-2233
IR-2233
2
Description
1.
Spraying button
2.
Burst steam button
3.
Steam regulating knob
4.
Cover of water filling mouth
5.
Spraying mouth
6.
ed soleplate
Teflon coat
7.
Water tank
8.
Indicator bulb
9.
Temperature regulating knob
10. Cord
11. Self-Cleaning button
Important safeguards
Please read the owner's manual before using the product.
Before using, please check the voltage of the product if it is the same with the
one in your home.
When using steam ironing, you are recommended to use boiled and filtered
water.
During the iron is electrified, operator must not leave, must not let children touch
the iron.
When filling water or pouring out remaining water. Please pull out the plug first.
After using, turn the temperature regulating knob to “0”, pull out the plug, put the
iron on the smooth and stable place vertically.
If the supply cord is damaged, it must be replaced by service center or qualified
persons in order to avoid a hazard.
The iron is not to be used if there are visible signs of damage.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the
appliance.
How to fill water
unplug the iron before filling with water.
pull up the cap of water filling mouth, fill until full.
push the cap back to its original position.
3
How to dry ironing:
Turn the temperature regulating knob to “0” position, turn the steam knob to “0” position,
put the plug into the socket.
Turn the temperature regulating knob to the temperature scale which the ironed clothes
required, the indicator will light on, then put the iron on the smooth and stable place
vertically.
After the indicator turn off, you can begin to iron.
How to iron with steam:
Fill water in the water tank.
Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for regulating
temperature is the same with dry ironing.
After ironing complete, turn the temperature regulating knob to the “0” position, pull out the
plug, take off the water tank, pour out the remaining water, turn the steam knob to the
“MIN” position
How to spray:
Press the spraying button repeatedly, water will spray out from the spraying mouth, at the
time, you should keep enough water in the water tank.
Burst steaming
Set the temperature regulator to the MAX.
Press the Burst steam button at intervals of 5 seconds
Warning:
enhanced steam emission may only be used with steam ironing (steam knob
should be set to a position other than "0")
This function can be used in an upright position of iron for vertical steaming
Self-Cleaning system:
Fill the water tank with water.
Set the temperature control knob to “MAX” and wait until the Indication Light first goes out.
Unplug the iron.
Keep the iron horizontaly over a sink and press and hold the “self-cleaning” button for a
minute.
Boiling water and steam will eject from the steam vents in the soleplate. Impurities and
scale (if any) will wash away with it.
Wait until water in the tank is over.
If the water is not clear enough, repeat cleaning.
Insert the mains plug into the wall socket and let the iron heats up again. Move the iron
over an old piece of cloth in order to let the remaining water vaporize.
Remove the plug from the wall socket and wait for the soleplate to cool down completely.
Make sure that the soleplate is completely dry before storing it.
Care and cleaning
For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical solutions.
To clean plastic surfaces using ordinary soap and water solution
Storage
Pull the plug out of the socket. Remove water from the water tank
Place the iron in a vertical position and allow it to cool completely
The importer retains his right to make changes in appearance and completeness of
the item without preliminary notification to the customer.
For household usage only.
The date of manufacture is marked on the packaging
TECHNICAL CHARACTERISTICS:
Voltage 220V/50Hz
Power 2000W
Service life 2 years
Made in China
