IR-
2
221
IR-2221
2
3
Description
1.
Spraying button
2
.
Steam regulating knob
3
.
Cover of water filling mouth
4
.
Spraying mouth
5
.
Teflon coating
6
.
Water tank
7
.
Indicator bulb
8
.
Temperature regulating knob
9
.Cord
Important safeguards
Please read the owner's manual before using the product.
Before using, please check the voltage of the product if it is the same with the
one in your home.
When using steam ironing, you are recommended to use boiled and filtered
water.
During the iron is electrified, operator must not leave, must not let children touch
the iron.
When filling water or pouring out remaining water. Please pull out the plug first.
After using, turn the temperature regulating knob to “0”, pull out the plug, put the
iron on the smooth and stable place vertically.
If the supply cord is damaged, it must be replaced by service center or qualified
persons in order to avoid a hazard.
The iron is not to be used if there are visible signs of damage.
When placing the iron on its stand, ensure that the surface on which the stand is
placed is stable.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety
Children should be supervised to ensure that they do not play with the
appliance.
How to fill water
pull up the cap of water filling mouth
fill until full
push the cap back to its original position.
How to dry ironing:
Turn the temperature regulating knob to “0” position, turn the steam knob to “0”
position, put the plug into the socket.
Turn the temperature regulating knob to the temperature scale which the ironed
clothes required, the indicator will light on, then put the iron on the smooth and
stable place vertically.
After the indicator turn off, you can begin to iron.
How to iron with steam:
Fill water in the water tank.
Use steam ironing, turn the steam knob to the “1, 2, 3” position, the method for
regulating temperature is the same with dry ironing.
After ironing complete, turn the temperature regulating knob to the “0” position,
pull out the plug, take off the water tank, pour out the remaining water, turn the
steam knob to the “MIN” position
How to spray:
Press the spraying button repeatedly, water will spray out from the spraying
mouth, at the time, you should keep enough water in the water tank.
Burst steaming
Set the temperature regulator to the MAX.
Press the Burst steam button at intervals of 5 seconds
Warning:
enhanced steam emission may only be used with steam ironing
(steam knob should be set to a position other than "0")
This function can be used in an upright position of iron for vertical steaming
Self-Cleaning Function:
When after use around one month, you could heat the soleplate above 100
℃
,
then put the steam button to Self-Cleaning place
The strong steam with some water will come out from soleplate, It will help clean
the soleplate and prolong soleplate life
Care and cleaning
For cleaning, use a soft cloth. Never use sandpaper, vinegar or other chemical
solutions. To clean plastic surfaces using ordinary soap and water solution
Storage
Pull the plug out of the socket. Remove water from the water tank
Place the iron in a vertical position and allow it to cool completely
The importer retains his right to make changes in appearance and completeness of the item
without preliminary notification to the customer.
For household usage only.
TECHNICAL CHARACTERISTICS:
Voltage
220
-240V/50Hz
Power
18
00W
Working life 2 years