10
2.3.3
Inspire Remote Control
The Inspire headset also includes a remote control that can be used with
the headset buttons to navigate through the different views and settings.
The remote control uses Bluetooth, 2 AAA batteries, has a touchpad, 2
buttons, and a trigger which can be used to activate voice commands.
2.3.3.1
Connecting / Disconnecting for the First Time
●
Open the Inspire app with the headset tethered to the phone.
●
Turn on the Inspire remote control by holding the power button. The
light will start blinking once the Inspire remote control is powered on.
●
Hold the power button and option button simultaneously (light will get
stable) to pair the controller with the phone until you get the audible
notification on the app, i.e. “Controller Connected”. On successfully
pairing, the stable light will turn off and will blink only when a button
is pressed on the controller.
●
Now you can use the controller within the app.
●
To disconnect, hold the power button until you get the audible
notification on the app, i.e. “Controller Disconnected”, and the light
will turn off on the controller.
2.3.3.2
Steps for Reconnecting the Remote Control
●
Auto-pair the controller:
If the app hasn’t been closed the user can
simply re-pair it by powering on the controller (holding the power
button). The controller will be auto connected, and an audible
notification will be played on the app “Controller Connected”.
●
Controller Connected and Application Closed:
If the app closes
while the Inspire remote control is connected, the user just needs to
follow the above-mentioned step (hold both power and option button
simultaneously) after opening the app.
●
Controller Disconnected and Application Closed:
In case
application is not running and Inspire remote control is not
connecting then the phone will need to be turned on and paired. User
will have to follow the above-mentioned steps to open the
application, turn on the BT controller, and then pair (hold both power
and option button simultaneously).
