56
/74
IRMA MATRIX R2 CAN Installation
manual
released
Rev. 1.6
Fig. 40:
On the left: start the "A21_Assistent" software / on the right:
splash screen of "A21_Assistent"
In the splash screen of the "A21_Assistent" the connection conditions are checked on the
PC:
Updat
e the COM interface (≠COM1) and se
lect the protocol of the IRMA gateway firmware
(J1708/IBIS).
Verify the device address of the IRMA gateway (Default= 1) and select the baud rate
suitable for the protocol (for IBIS=1200 bps/fpr J1708=9600 bps).
Click on "Next>>”
If the entries are correct, the software starts reading out the IRMA
gateway. If the entries are not correct, an error message appears "No IRMA analyzer found".
Summary of Contents for IRMA MATRIX 2
Page 81: ...153 Kontrollmaß 12 ...