IRMA6-SENSOR-HD-00-SWITCH-(IO)-00-(R)(1)
Installation Manual | Released
Rev. 1.4 | 12/2020
12
/ 27
Connect IRMA 6 to PC
Connect IRMA 6 with the PC via switch from component
with
the M12 system Ethernet cable
K-M12CAT5-XX-xm
and the
outgoing adapter cable
KQ-M12CAT5-RJ45-01-xm
for service
purposes (update, configuration).
Only
possible with service PCs having an Ethernet interface.
Connect IRMA 6 to door contact (on
demand)
Connect the wire strands of the cable from component
either
directly to the door control unit or establish a circuit with the wire
strands via a limit switch (external power supply from vehicle
required).
See cabling diagram for wiring overview of IRMA 6 in the vehicle,
see Fig. 3, p. 13.
Adapter cable
KQ-M12CAT5-RJ45-01-xm
Variant 1
Variant 2
M12 door contact
connector (f)
