Package Contents:
Please unpack your new Sentinel camera and check to make sure the following items are
included in the box. If there are any items missing please contact your Iris dealer
immediately:
•
The Manual (obviously ;-)
•
IRIS106 Camera
•
Fixing Screw Pack
•
Screw Terminal Jack Plug / Socket set
•
Fixing Template
•
Warranty Card
Basic Configuration
It is possible to create a system using multiple cameras, controllers and viewing positions
simply by introducing video switchers and amplifiers, serial data distributors and a variety
of other transmission peripherals.
If your system consists of a single camera / single controller setup, the simplest method
of connection is shown below.
There are three aspects to the cameras connectivity:
Video:
1VP~P Composite Video 75
Ω
impedance (such as RG59 / RG6 etc)
Data:
RS485 Serial Data - 2 wire (RS485 A / RS485 B) - 24AWG
Power: 2 Core (DC+ / DC GND), 18AWG, 12VDC < 2A
The diagram below show a basic 1 camera 1 controller setup using combined power/
video/data cable to simplify cabling. For more details on Iris cable options see page 15.
11
Rev: 01.01 / 18-06-19
Video
Power Data
Contr
oller
+12VDC ±10%
Data
Video
Power
