manualshive.com logo in svg

IRIS G115E / TUTOR T.1, Flight Manual

Share
Download
IRIS G115E / TUTOR T.1 Flight Manual Download Page 31

I A P   2 0 2 1 . 0 0 1 - A F M   /  

I R I S   G 1 1 5 E   /   T U T O R   T . 1  

        P a g e

 | 

31 

 

FOR SIMULATION PURPOSES ONLY 

 

Full scale deflection represents approximately ½ degree deviation from the 
ideal glide path. 

Compass Warning Flag 

A red flag labelled HDG is visible in the upper right quadrant of the display 
whenever the power supplied is inadequate or the gyro is not up to speed. 

If this flag is in view then the heading information is unreliable but the 
VOR/localizer and glide path deviation bars, the To/From indicator and the 
NAV flag will continue to give correct information. 

NAV Warning Flag 

This red flag appears in the upper left quadrant whenever an unusable 
VOR/localizer signal is being received or the NAV receiver unit is not turned 
on. 

NAV/GPS Selector 

The NAV/GPS button directs either NAV 1 or GPS information to the HSI 
selected course deviation bar, however a safety system ensures that GPS 
information is not connected when an ILS frequency is selected on NAV 1.  

The NAV/GPS button light will default to NAV when an ILS frequency is put on 
NAV 1 (if GPS was selected).  

 

 

Summary of Contents for G115E / TUTOR T.1



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands