IRIS DC1100 Installation And Operational Manual Download Page 43 | Manualshive

Page: 43 / 60

background image

Coaxial Networks, Inc.

Page 43 of 60

Application Notes

Network traffic between cable clients

By default IRIS does not allow traffic between CPEs behind cable modems on the same IRIS. To
enable this you have to turn the “

NetLoopbackMode

” setting in iris.txt file to “1”.

Edit the “iris.txt” file from the system prompt and then change the above seeting to

NetLoopbackMode = 1

Save the file and restart IRIS.

Allowing PPPoE traffic across IRIS

By default IRIS is configured to forward Ethernet packets of IP protocol type only. If you wish to
offer PPPoE services to your customers, you have to configure IRIS so that PPPoE protocol is
forwarded across IRIS. This configuration applies if you are operating IRIS in bridge mode.

Edit the “iris.txt” file from the system prompt and then under the
“

BEGIN_NetProtocolType

“ section add the following lines which specify the PPPoE

Ethernet packet type

BEGIN_NetProtocolType
TypeField1 = 0x81
TypeField2 = 0
TypeLength = 1
END_NetProtocolType

Make sure you do not remove the default forwading for IP Ethernet packet types.

BEGIN_NetProtocolType
TypeField1 = 8 // default = 8 (IP)
TypeField2 = 0 // default = 0 (ALL)
TypeLength = 1 // default = 1
END_NetProtocolType

Save the file and restart IRIS.

Static IP Mapping

When IRIS is operating in Router mode, some ISPs will like to reserve a publicly routable IP
address for a specific CPE behind the Network Address translation. Using this feature IRIS will
then create a one to one mapping between the public IP address and the private IP address. This
feature of NAT is called BIMAP.

«
...
41
42
43
44
45
...
»

Summary of Contents for DC1100





























































Reviews:

No comments

Related manuals for DC1100

Total Access 1240

Brand: ADTRAN Pages: 146

Brand: Banner Pages: 4

Brand: Black Box Pages: 101

Brand: Zte Pages: 16

Brand: Scientific Atlanta Pages: 92

Brand: Belkin Pages: 30

Brand: Belkin Pages: 52

Brand: Cradlepoint Pages: 5

Brand: Vonage Pages: 112

Brand: SkyWave Pages: 106

Brand: Access Pages: 3

Brand: SMC Networks Pages: 100

Brand: Embedded Pages: 44

SURFboard SBG6950AC2

Brand: CommScope Pages: 64

Brand: Zte Pages: 7

Brand: Assured Wireless Pages: 24

Brand: Ponast Pages: 2

SATELLINE-EASy Pro 35W

Brand: Satel Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands