●GLOVES SUGGESTED TO AVOID INJURY DURING ASSEMBLY.
●PLEASE ASSEMBLE ON A FLAT SURFACE, AND BE CAREFUL NOT TO SCRATCH THE FLOOR.
ASSEMBLY METHOD
Connect the rubber feet to each panel.
(2 rubber feet on each panel)
Insert the axis and the buckle on both
ends of each panel to connect.
Hold the installed panels upright and attach
the end panels together.
Connect all the panels to finish the installation, as shown in the figure.
Separately sold panels can be used to create a larger pet pen.
See instructions for how to connect panels.
(Panels are sold without doors.)
● Connect up to a maximum of 8 panels.
Arrange the panels properly.
Mounting hole
Rubber foot
● Press the axis downward to
snap it into place.
Rotate the handles to open or close the door of
the pet pen. (2 handles total)
Operation of the handles
(locking/unlocking)
Buckle
Axis
Lock
Unlock
2 Panel Expansion Pack
* Model shown is CI-604E