IRIS Net RCM-26, Owner'S Manual

Page: 68 / 76

68
RCM-26 Remote Control Module
4 Appendix
4.1 Specifications/Technische Daten
NETWORK AND GENERAL FEATURES
Remote Control and Software
IRIS-Net™, Multiple PCs possible, MS Win-
dows 98, 2000, XP
Maximum Configuration 250 Amplifiers in total, 100 Amplifiers per
CAN bus, 1000 meter cable run
Supervised Amplifier Parameters Operation mode, temperature, output volta-
ge and current, impedance of connected
speakers, protection mode status, mains
voltage and current, power consumption, pi-
lot tone detection
Network Supervision CAN bus failures, defective or missing am-
plifiers, bandwidth, failure protocol and mes-
saging
Audio Monitoring All input and output signals
AUDIO SPECIFICATIONS
Analog Audio Input
2 audio inputs on internal slot connector,
pre-/post fader selectable
Input Level (nominal) +6 dBu / 1.55 V
Input Level (max. before clip) +21 dBu / 8.7 V
A/D Conversion 24 Bit linear, Sigma-Delta, 128 times over-
sampling
Digital Audio Input AES3 (AES/EBU) format, XLR In/Thru con-
nectors
Input Sample Rates 32 kHz...192 kHz, internal Sample-Rate-
Converter
Audio Output 2 audio outputs on internal slot connector
Output Level (nominal) +6 dBu / 1.55 V
Output Level (max. before clip) +21 dBu / 8.7 V
D/A Conversion
24 Bit, Sigma-Delta, 128 times over-sam-
pling
Monitor Outputs 2 x RJ-45 (REMOTE), electronically sym-
metric (Pins 7/8)