background image

Camera Setup

The  IRIS066  camera  features  an  in-line  micro 
thumb-stick  controller  to  allow  video  format 
configuration  and  access  to  the  camera’s  on 
screen menu system.

Setting Video Format 

The  camera  is  set  to  CVBS  (composite  video)  as 
default.  To  change  video  format  simply  move  the 
joystick according to the directions below

HOLD JOYSTICK IN DESIRED POSITION FOR 6 SECONDS 

TO SET VIDEO FORMAT

On Screen Menu Setup 

The cameras on screen menu system lets you set 
up  many  features  including  Auto  Exposure,  White 
Balance, Video Resolution, Day Night settings and 
Mirror Image.

To enter the SETUP mode press the joystick down 
whilst  it  is  in  the  central  position.  You  should  see 
the main menu appear on the screen.

NOTE: If the joystick remains ideal for 10 seconds 
in any menu mode the camera will return to normal 
operation  and  you  will  have  to  re-enter  menu 
mode.

Once in side the menu mode, navigate by moving 
the  joystick  up  and  down  (in  accordance  with  the 
orientation  shown  in  the  diagram  above)  and 
change values by moving Right to increase values 
and Left to decrease values.

MAIN MENU: 

(Sub Menus in BOLD) 

AE (Auto Exposure) 

WB (White Balance) 

DAY / NIGHT  

VIDEO SETTINGS 

LANGUAGE 

RESET 

SAVE - EXIT 

EXIT 

AE (Auto Exposure) Menu: 

BRIGHTNESS 

EXPOSURE MODE 

GAIN 

RETURN 

WB (White Balance) Menu: 

MODE (ATW or MWB) 

DAY / NIGHT 

MODE (Ext, Auto, Colour, B/W)

(c)2018 Iris Innovations Limited. All Rights Reserved. v01.00 19/08/18. E&OE

UP = CVBS

DOWN - CVI

LEFT = AHD

RIGHT = TVI

Summary of Contents for IRIS1720













Reviews: