background image

Iridium Communications Inc. 

                                    Information Contained in this Guide

  

9602 SBD Transceiver Product Developers Guide                                             is Subject to Change Without Notice  

Revision 4.0 

Iridium Communications Inc.                            

 

            Distribution of Guide Restricted 

Proprietary & Confidential Information                         7                                                  to Product Developers Only           

1.2  Transceiver Packaging and Regulatory Certification  

 
The 9602 SBD Transceiver is a regulatory approved daughter module transceiver that can be fitted within 
an enclosed host system.  With appropriate external connections, the host system can be designed to 
meet full transceiver regulatory tests and sold as a Regulatory Certified product that meets CE, FCC and 
IC requirements. 
 
The 9602 is tested to the regulatory and technical certifications shown in Table 1 (See Note below). 
 
The 9602 is certified as a module for non-portable applications – i.e. those that do not combine the 9602 
with another radio element and have an intended separation distance of over 20 cm from a person. 
Additional testing and certification are required for applications that combine the 9602 with another radio 
element or are intended for use within 20 cm of a person. 
 

 

Table 1: Regulatory and Technical Certifications. 

 
 

Regulatory 

Approvals 

Radio Tests 

EMC Tests 

Electrical / 

Mechanical / 

Operational  

Safety Tests 

 

CE 

 
 
 

 
ETSI EN 301 441 V1.1.1 
(2000-05)                   
                               

 
ETSI EN301 489-1 V1.8.1(2008-04) 
             
ETSI EN 301 489-20 V1.2.1(2002-11)        
  
 

 
EN60950-1:2006   
Part 1        
          

FCC 

 

FCC CFR47 parts 2, 15, 
and 25                            
 

EN61000-4-2 : 1995/A2 : 2001  Part 4.2     
 
EN61000-4-3 : 2002  Part 4.3                     
 
EN61000-4-4 : 2004                                 
 
EN61000-4-6 : 1996/A1 : 2001 Part 4.6      
 
EN55022:2006 

 

Industry 

Canada 

Industry Canada 
RSS170 Issue 1, Rev 1, 
November  6, 1999     

 

 

 

 

Note: The initial 9602 FP1 & FP2 prototype units are different from the commercially produced 9602 SBD 
Transceivers from a regulatory and certification perspective. Those initial units cannot and should not be 
used for any commercial purpose or for any regulatory certification or compliance purposes. Only the 
commercial 9602 units conform to the regulatory approved design and the regulatory and technical 
certifications listed in Table 1. 

Summary of Contents for SBD9602



























Reviews: