Iridium RTU4120A Operating Instructions Manual Download Page 32

Page: 32 / 36

Dimmer/Contrast Menu

To access the dimmer/contrast function menu, press:

System

Time/date

Show

Shows the time and date.

Set

Sets the time and date.

Sys.update

Sets the system to update the time and date.

GPS update

Sets the GPS to update the time and date.

SW versions

Transceiver

Displays the software version number of the transceiver.

LBT

Displays the software version number of the LBT.

Ctrl unit

Displays the software version number of the handset.

Call answer

Status

Shows the status of Call Answer, i.e. who is set to receive incoming calls.

All

Incoming calls go to all control units and the PSTN phone.

One CU

Incoming calls go to a specific control unit.

PSTN

Incoming calls go to the PSTN phone.

SIM Card

PIN enable

Enable PIN code

PIN disable

Disable PIN code

Change PIN

Change PIN code

PUK code

Enter PUK code

Reset

Restart

Restarts the system (works like switching the power off and on again).

Factory res

Restarts the system and reloads all factory settings.

Action

Dimmer

Turns the display backlight on.

Off

Turns the display backlight off.

Level

Adjusts the level of the display backlight.

Contrast

Adjusts the display contrast.

0125

Summary of Contents for RTU4120A





































Search results

Summary of Contents for RTU4120A

Reviews:

Related manuals for RTU4120A

Brands by name

Popular brands

Iridium RTU4120A, Operating Instructions Manual

Search results

Summary of Contents for RTU4120A

Reviews:

Related manuals for RTU4120A

Brands by name

Popular brands