1
1 Product Overview
The 9522A L-Band Transceiver (9522A) is designed to be integrated
into a specific application with other hardware and software to produce
a solution designed for a specific application or vertical market. Some
examples of these solutions include a maritime voice telephony terminal
or a vehicle tracking solution.
The 9522A functionally supports all of Iridium’s voice and data services.
Applications can be built to use one or multiple services using the voice
and data interfaces. The 9522A is a functional replacement to the 9522
“Sebring” L-Band Transceiver. However it should be noted that there are
some differences to the voice interface.
The 9522A is regulatory approved for FCC, Canada, and CE. This
allows the 9522A to be integrated into a variety of subscriber products,
or retrofitted into existing L-Band Transceiver based products. These
products, when integrated together will require Regulatory testing to be
conducted by the integrator. Please note that the 9522A is only
approved for use with an antenna that has a gain of
≤
3 dBi.
The 9522A is essentially provided as a ‘black box’ with all interfaces
provided via a DB25 connector. The product provides the core trans-
ceiver module and SIM card reader. All other functions and hardware
such as keypad, display, power supply, antenna etc. must be provided
by the solution developer. The DB25 provides the following interfaces
and connections:
• Analog Audio
• Control / Digital Audio
• RS232
• Power Input
• On / Off
2 Export Compliance Information
This product is controlled by the export laws and regulations of the
United States of America. The U.S. Government may restrict the export
or re-export of this product to certain individuals and/or destinations. For
further information, contact the U.S. Department of Commerce, Bureau
of Industry and Security or visit www.bis.doc.gov.
3 Standards Compliance
The 9522A is designed to comply with the standards for Radio
Emissions Compliance, Electromagnetic Compatibility, and AC Safety in
the United States, European Union and Canada.
3.1 FCC Compliance
The 9522A is certified under 47 CFR Part 25 as FCC ID:Q639522AC. It
also complies with Parts 2 and 15 of the FCC Regulations. Operation is
subject to the condition that this device does not cause harmful interfer-
ence. Any changes or modifications, including the use of a non-standard
antenna, not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT:
To comply with FCC RF exposure requirements, a min-
imum separation of 20 cm is required between the antenna and all
persons.
3.2 CE Compliance
This product complies with the European Community Council Directive
for R&TTE, 99/5/EC, provided that the integrator/user adheres to the
instructions detailed in this 9522A Interface Specification. This product
is in compliance with applicable ETSI standards. Compliance with the
requirements of ETSI EN 301 489 requires the use of a shielded digital
data interface cable.
62425_user_guide 3/23/06 1:55 PM Page 1
