Iridex LIO Plus, Operator'S Manual, Page: 12 / 21

9 IRIDEX
®
LIO Plus Operator Manual 88046-EN Rev A
4
Maintenance
t
o provide routine Care
:
• Do not kink or bend the fiber-optic cable.
• When the fiber-optic cable is connected to the console, ensure that the cable is located
away from high traffic areas.
• Do not strike the fiber-optic connector against hard surfaces.
• Keep the optical components free of fingerprints.
• When not in use, cover the LIO to keep it free of dust, and store all accessories
in suitable storage boxes.
Inspecting the LIO
Inspect the LIO for dirt, debris, and damage prior to each use.
Cleaning the Fiber-Optic Connector
Always inspect the fiber-optic connector for cleanliness prior to use; if needed, clean the connector
using a cotton swab moistened with acetone. Inspect the fiber-optic connector using a minimum of
100X magnification to verify cleanliness. Inspect the lanyard for contamination before re-installing it
onto the fiber-optic connector.
Cleaning the External Surfaces
Wipe the external surfaces of the LIO (except the optics) with a soft lint-free cloth dampened with a
70/30 Isopropyl Alcohol (IPA) solution.
Cleaning the Optical Components
t
o Clean the optiCal Components
:
1. Place 2-3 drops of high-grade acetone onto a cotton swab.
2. Wipe the optics gently in one direction with the swab to remove all dust and debris.
3. Repeat as needed with a fresh swab until all dust and debris have been removed
from the optical surfaces.