Method of Usage
Method of Usage
·
Next, turn the legrest fixing cover over to cover the round tubes on both sides of
the legrest (Figure 3).
·
Fasten the legrest to the massage chair with two M4 screws (one on each side).
Check whether there is any abnormality during turning up and down, or any tube,
cable or wire is folded. If everything is OK, the legrest is installed (Figure 4).
9.Floor Protection
·
The prolonged heavy pressure on the massage chair may cause scratches on the
floor. Thus, put a carpet or cushion on the floor where the massage chair is placed
to avoid this damage.
3 4
8. Instructions for Removal and Use of Head Cushion and Backrest
·
The use of the head cushion can reduce the intensity of kneading massage on
the neck and shoulders. You can decide whether to use the head cushion
according to your own needs (the head cushion is recommended). The backrest
and the back cushion are connected by a zipper (1). The head cushion and the
backrest are connected by a zipper (2).
Zipper Zipper
Note: Do not move the massage chair with its wheels on the rough ground or in a
narrow space. At least two persons are required to lift it. During lifting, take the
legrest sealing plate and backrest cover grooves as the acting points. (Do not lift the
armrest directly.)
10.Instruction for Movement
·
Make sure that all the wires are pulled away from the massage chair surface;
then press the backrest down to a certain angle (with the center of gravity resting
on the wheels), you can push the massage chair forward with hands, move it to a
suitable position and gently restore it to the normal angle. (Note: During
movement, you must turn off the power button first and then unplug the power
cord and the remote controller connection wire.)
1 2
Warning : The rear moving wheels of the massage chair are only suitable for short-
distance and slow movement. For long-distance transportation, please use other
auxiliary moving tools to move this massage chair!
18
19
