17
16
1
1.Enter the smart device main menu. Open "Settings" and select the "Bluetooth"
option. Open "Bluetooth", and Bluetooth will automatically "Search for a New
Bluetooth Device".
2.The smart device will search for the corresponding Bluetooth model (IMCM-
XXXX). Click the "Match" button. If you are asked whether to match with the
device, you just select "Match" to complete matching.
3.Turn on "Music Player" in the smart device and select the song to play.
Ⅳ
.Operation Instructions for Bluetooth Speaker Play
Method of Usage
Method of Usage
Ⅶ
.InstructionsforRemovalandUseofHeadCushionandBackrest
·
The use of the head cushion can reduce the intensity of kneading massage on the
neck and shoulders. You can decide whether to use the head cushion according
to your own needs (the head cushion is recommended). The backrest and the
back cushion are connected by a zipper (1). The head cushion and the backrest
are connected by a
(2).
Zipper
Zipper
2
Zipper
3
.Hang the lower leg sleeved with the fixing block on the hook of the massage chair
seat frame (Fig. 3).
4
.Fasten the lower leg on the massage chair with 4 M4 screws (2 on the left and 2
on the right). Check whether there is any abnormality in the up-and-down turning
and whether the pipeline is folded. Then the lower leg installation is completed
(Fig. 4).
3
4
1
.After connecting the lower leg and the air tube on the massage chair with the wire
harness, untie the fixed pipeline belt and insert the connecting part into the seat
frame (Fig. 1).
2
.Sleeve the lower leg fixing block on the round tubes on the left and right sides of
the lower leg (Fig. 2).
Ⅵ
.Instructionsforinstallationoflowerleg
1
2
·
During the massage process, press the power on/off key to immediately turn off all
massage functions, reset the backrest frame and the lower leg frame, or when the
massage timing time arrives, all massage functions will be automatically turned off,
with the backrest frame and the lower leg frame not reset.
V.End massage
·
Shut off the power supply of this product, as shown in the attached figure (Power
Shut-off Diagram of the Product).
Power Shut-off Diagram of the Product
Disconnection Diagram
Unplugging Diagram
