iRest A710-12 Operation Instructions Manual Download Page 16

4D

Method of usage

Method of usage

Function

Description 

On/Off key: short press this key to suspend operations and press it for 
3 seconds to turn it on and off. If the pause lasts for more than 20 
minutes during massage, all massage functions will be automatically 
turned off.

4D intensity knob key: Adjust the massage intensity of 4D manipulator 
(weakened when rotating counterclockwise, enhanced when rotating 
clockwise), and the intensity ranges from Level 1 to Level 5.

Zero-gravity key: each time the key is pressed, the position of the calf 
frame and backrest frame will be automatically adjusted to the 
zero-gravity position. There are two zero-gravity lying modes, which can 
be switched in cycles.

Footrest shortening key: manually adjust the Footrest shortening;  
Press this key to slowly shorten the movement of the Footrest up, 
release to stop.  

Footrest elongation key: manually adjust the Footrest elongation;  
Press this key to slowly extend down the Footrest to move, release 
to stop. 

Auto Mode key: Switch the automatic massage function every time 
you press it.

Voice Control Wake-up key: Short press this key to wake up the voice 
control, long press for 3 seconds to turn on/off this function.

Seat-up key: Press and hold this key to slowly rise the backrest frame 
while slowly lowering the calf frame, and release it to stop rising of the 
backrest frame or lowering of the calf frame; after the seat-up action is 
completed, the calf frame will automatically detect the foot length.

Seat-down key: press and hold this key to slowly lower the backrest 
frame while slowly rising the calf frame, and release it to stop lowering 
of the backrest frame or rising of the calf frame; after the seat-down 
action is completed, the calf frame will automatically detect the foot 
length.

29

28

IV. Voice Control Mode

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

No.

Voice Control Entry

Voice control entry

Answer entry

·

When the massage chair is turned on or in standby mode, the sound “Hi Alice”  or 

“Hey Alice” will be produced to enable the voice control function. Alternatively, you 
can press the voice control button armrest to enable the voice control function.

·

Long press the Voice control button 3 seconds to turn on or off the voice control 
function.

·

After such function is enabled successfully, the massage chair will reply “I am here.” 

At this moment, once a corresponding voice control entry to be implemented is 
given within six seconds, the corresponding voice control function can be performed 
after a reply is received from the massage chair; if no correct voice control entry is 
given within six seconds, the voice control function automatically will be off 
automatically and needs to be enabled again.

·

Note: When waking up the voice control function, please use English, the speech 

rate is moderate, Voice commands should be follow up the Voice entry.

Entry: “Hi Alice” or “Hey Alice”. Answer: I am here.

Massage on

Massage close

Stress Relieving

Energy

Good-night Sleep

Neck & shoulder care

Full-body stretch

Spine Massage

Open the air pressure

Close the air pressure

Up the seat position

Down the seat position

Change the other mode

Go little down

Go little up

Answer: Ok, Massage on.

Answer: Ok, Massage close.

Answer: Ok, Stress Relieving.

Answer: Ok, Energy.

Answer: Ok, Good-night Sleep.

Answer: Ok, Neck & shoulder care.

Answer: Ok, Full-body stretch.

Answer: Ok, Spine Massage.

Answer: Ok, Open the air pressure.

Answer: Ok, Close the air pressure.

Answer: Ok, Up the seat position.

Answer: Ok, Down the seat position.

Answer: Ok, Change the other mode.

Answer: Ok, Go little down.

Answer: Ok, Go little up.

Note: commands 14 and 15 can only be used after command 13.

Summary of Contents for A710-12






















Reviews: