Irenis MPE-2000, User Manual

Page: 35 / 36

IRENIS MPE-2000 MPEG-2 Encoder
User’s Manual
33 / 34
Chapter 5 Troubleshooting
ISO9001 quality assurance system has been approved by CQC organization. For
guaranteeing
the products’ quality, reliability and stability, all the products pass the
testing and inspection before products are shipped out factory. The testing and
inspection scheme already covers all the Optical, Electronic and Mechanical criteria
which have been published by our company. To prevent potential hazard, please strictly
follow the operation conditions.
Preventive Measures

Installing the device at the place in which the environment temperature is
between 0 to 45 °C

Making sure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary

Checking the input AC within the power supply working range and the connection is correct before
switching on device

Checking all signal cables have been properly connected

Frequently switching on/off device is prohibited; the interval between every switching on/off must be
greater than 10 seconds.
Conditions need to unplug the power cord

Power cord or socket damaged.

Any liquid flows into device.

Any stuff causes circuit short

Device in damp environment

Device was suffered from physical damage

Longtime idle.

After switching on and restoring to factory setting, device still cannot work properly.

Maintenance needed