Specifications are subject to change without notice. - 7 - BLANKOM MPE 4400 EN 2020 V1.1
MPE-4400
VIRTUAL – CHANNEL – TABLE is nearly a similar info as LCN in DVB NIT: Logical Channel Number (v1 supported)
assignment in the NIT (Network Informatioin table) -> And that’s the DVB-tool you can use and setup here if needed
when adding these to an existing network:
Close VCT and ADD pressing will open a POPUP Window´. Here you can not assign your NIT for the modulators behind
this unit to serve a DVB (T/C network).
Please note: The multiplexing addons like VCT are only for US related standards. NIT / DVB is not supported yet, so this
has to be injected externally or after the device by the other channel modulators in the network.
We recommend to first setup the required output parameters befor configuring the encoders:
