BLANKOM HDE-4K5 User Manual
Version 1.0 – 12-2018
Page - 17 -
techn. data are subject to change w/o notice!
The hardware status is just informal and shos if some pakets where interrupted or lost.
System settings:
Here you can change your password. If you once forgot your password, you can RESET the unit by a front - switch
button (press RST > 10 seconds better 15
by a needle through the hole
) and all default factory settings will come
back. Or you can RESET the unit if you already are logged in. The Version info shows actual installed Firmware Version.
Scheduled restart interval adjustment:
The devcice can also be forced to reboot periodically to swing into new in- and output circumstances -like if the
network is periodically interrupted (i.e. by DSL Router or ISP disconnection over night) - you can program a
scheduled task for restarting every 0…200 hours.
Hint:
If you change some settings in particular for the encodings, and press SETUP/Modification, a popup message
will appear:
