Quick-Start-Manual
All technical data are subject to change w/o further notice .... © Irenis GmbH 11-2022
Set the max qp for rate control from 1 to 63 (default 55).
'min_qp'
Set the min qp for rate control from 1 to 63 (default 20).
Sets the Number of slices to operate on at once within a core.
Slices are a fundamental part of the stream format. You can operate on slices in parallel to
increase speed at which a stream is processed. However, operating on multiple “slices” of
video at once will have a negative impact on video quality. This option must be used when
encoding 4k streams to H.264 in order to sustain real-time performance. The maximum
practical value for this option is 4 since there are 4 encoder cores in a device.
How to connect our Video Encoder to OBS?
Open Broadcaster Software
https://obsproject.com/download
Our HDE- or SDE Video Encoder Hardware can send/connect video to OBS by NDI or VLC Video
Source, 1. Open the OBS software, click in the free area of 'Source' on the right, or click “+” in the
lower left corner to added, here you can add.
If the item “NDI source” is not displayed, the obs-ndi plug-in needs to be installed, you can download
and install it from
https://github.com/Palakis/obs-ndi/releases/tag/4.6.2
https://github.com/Palakis/obs-ndi/releases
https://github.com/Palakis/obs-ndi/releases/tag/dummy-tag-4.10.0
Installation the VLC Source as Playlist:
Open VLC, get your Playlist open and insert a network-stream input like UDP or here SRT:
