www.blankom.de - 20 - [email protected]
All technical data are subject to change w/o any notification
*) HDMI compatible Interfaces
BLANKOM EMU 8600 EN 2022 V1.1
EMU 8600
Safety instructions
Read the safety instructions carefully before assembling or commissioning the device and ensure that you comply with them
1. Installation
Danger: The device may only be installed and started up by competent people (see EN 60065).
Danger: The device and the peripheral distribution devices must be earthed properly (potential equalization) in accordance
with EN 60728-11 before
Commissioning and remain earthed even when the device is dismantled.
Danger: The device may not be installed on a flammable base (risk of fire).
Danger: Only connect the device to a socket that is installed correctly and connected to devices that has an earth conductor
(Depending on Model andUsage).
Danger: Plan the assembly or installation location to ensure that children cannot play with the device and its connections.
There is a risk of electric shock (Danger of death).
Danger: Select an assembly or installation location in which fluids or objects cannot get into the device under any
circumstances (e.g. condensation, water for watering plants, etc.).
Danger: Ventilation slots and refrigeration units are important function elements on the devices. If devices have refrigeration
units or ventilation slots, you must ensure that they are never covered or built over. Also ensure that there is sufficient air
circulation around the device. This prevents possible damage to the device and the risk of fire due to overheating. Ensure a
minimum of clearance of 20cm between the device and other objects.
Danger: The assembly or installation location must allow all connected cables to be laid safely. Cables and power supply
cables must not be damaged or crushed by any objects. Furthermore, ensure that cables are not laid in the immediate
vicinity of sources of heat (e.g. radiators, other electrical devices, fireplaces, etc.) (Risk of fire), (risk of electric shock danger
of death)
Danger: In order to prevent damage to the device, as well as possible subsequent damage (risk of fire), devices intended for
installation on the wall are only permitted to be installed on a level surface and not above head height.
Warning: (Only for optical transmitters and their peripheral distribution devices) Never look directly or indirectly into the
laser beam. Only connect the device to the power supply once all optical lines are connected securely.
Warning: The safety regulations in the relevant current standards EN 60728-11 and EN 60065 must be complied with.
Warning: Comply with all applicable national safety regulations and standards.
Warning: The device's mains plug must be easily accessible at all times.
Warning: Follow all instructions in the device-specific operating manual
2. Operation
Danger: The device is only permitted to be operated in dry rooms in a non-tropical climate. In damp rooms or outdoors,
there is the risk of short circuits (risk of fire) or electric shock (danger of death).
Danger: Do not insert any objects through the ventilation slot. Risk of electric shock (danger of death).
Danger: Do not put any containers filled with liquid (e.g. vases) on the device. There is a risk of electric shock (danger of
death) or (risk of fire).
Danger: No open sources of fire such as burning candles are permitted to be placed on the device (risk of fire).
Danger: Ensure that there is a clearance of at least 20cm around the device. The device ventilation is not permitted to be
impaired by covering the
Ventilation openings with objects such as newspapers, tablecloths, curtains, etc. (risk of fire).
Warning: Follow all instructions in the device-specific operating manual.
3. Maintenance
Danger: Maintenance tasks must always be carried out by competent people (see EN 60065).
Danger: Do not carry out servicing work during thunderstorms. There is a risk of electric shock (danger of death).
Warning: (Only for devices with batteries): Risk of explosion if the battery is replaced improperly. Only replace with the
same type!
Warning: Batteries must not be subjected to excessive heat such as sunlight, fire or similar (risk of explosion).
Warning: Only use the manufacturer's accessories or accessories with identical technical properties.
Warning: (For optical transmitters and their peripheral distribution devices) unplug the mains plug before dismantling the
device.
4. Repairs
