www.iReliev.com
5
SET UP PROCEDURES
For best results, we recommend using the weighted heating pad in either a lying or sitting position.
1.
Locate cord connector on the product near the care instructions label.
2.
Do not plug into the wall outlet until you have connected the controller cord to
the product.
3.
To connect the cable to the connector, align the connector and cable arrows
and push gently until it locks.
4.
Plug the power cord into a 110-120 wall outlet.
5.
Make sure all cords are tangle free and not trapped or pinched in any way,
including but not limited to between mattress and box spring, sofa cushions,
against wall, chairs, or other furniture.
6.
Do not wrap the controller in the throw while in use.
7.
Do not use with generator power.
8.
To disconnect the controller, fi rst unplug the cord from the outlet, then pinch
sides of the connector and pull apart.
This heating pad has a polarized plug (one blade is wider than the
other) as a safety feature. This plug will fi t into a polarized outlet only
one way. If the plug does not fi t fully into the outlet, reverse the plug. If
it still does not fi t, contact a qualifi ed electrician.
Plug into wall outlet
locate and align arrows
Caution:
The cable must be fully plugged in. A loose connection could cause a fi re hazard.
DO NOT ATTEMPT TO OVERCOME THIS SAFETY FEATURE.
WARNING:
Do not use this heating pad with other heating pads/electric blankets under
sheets. The heating pad will shut off automatically after 1.5 hours.
