8
4. Plug the power cord into the hand controller.
5. Plug the power adapter into the wall socket.
6. Insert both of the air hoses into the hand controller until snug.
7. Press the ON/OFF button on the hand controller to start the device. It
will default to M1 (Sequence Mode) and the lowest Air Pressure setting
when turned on. After 20 minutes, the device will shut off automatically.
Press the power button to restart and continue using.
Note:
The Heat function is OFF by default. Press the Heat button once for
the “low” Heat setting or press it again for the “high” heat setting.
Press the button again to shut off the heat function.
Make sure prongs are aligned to the openings
