AT20 Online Dual-spectrum Thermal Camera User Manual
11
8.
Mechanical Installation
The front and back of the thermal camera are equipped with
mounting interfaces, which can be installed with screws after the
holes are punched with the auxiliary stickers in the package. In
addition, we also provide two optional forms of front and back
installation.
WARNING
Do not use too long screws in case of damaging the thermal camera. The
maximum hole depth of the front shell is 10mm, and the maximum hole depth
of the rear shell is 4mm.
It’s normal that the thermal camera will generate heat during
operation. In order to sufficiently dissipate the heat, it is suggested
that the back shell of the thermal camera should be fixed on a metal
object to minimize the temperature drift of the infrared detector in
thermal camera.
8.1 Installing Shells with Screws
8.1.1 Installing Front Shell
As shown in Figure 8.1, please paste the sticker to the position to be
installed, and then punch 4 Φ2.5 mounting holes according to the