9.2
| 3886 Multi-Gas Module Application
3886 Multi-Gas Module
22
3886 Multi-Gas Module
9.1| Configuring the 3880 Monitor for the 3886 Multi-Gas Module
21
b. Activate the
Agents
feature on the Monitor by pressing the button and then
pressing the Button.
a. Ensure the
1887 antenna
is attached to the
rear side
of the Monitor.
a. Once connected, insert the
nomoline
into the 3886 Multi-Gas Module.
Be aware, the 3886 Multi-Gas Module is MR Conditional
b. Connect the cannula or airway adapter’s
sample line
to the nomoline.
Gases are Detected Ready to Measure Gases Multi-Gas Module is Calibrating
Error with the Multi-Gas Module Error with Nomoline
Multi-Gas Module LED Light Color Codes
c. Turn the
Agents and/or MAC
parameters
ON
and push the back button twice.
d. Press the
CO2 section
of the Monitor’s sceen to open the menu. Click the
Agents Channel
to connect the 3886 Module to the Monitor.
e. The connection light on the 3886 Multi-Gas Module
will
illuminate
when
connected.
