2021 IQtronic technologies Europe s.r.o.
Page 71 of 97
If you wish to read the file, use the Open File button and upload the file test1.cmd.
If the file is correct, it will be displayed, in other cases an eror message will appear.
The software is made again very intuitive, the
Commands
tab consists of two
windows:
List of commands,
where control commands are displayed, and
List of
command parameters
, where potential command parameters are displayed, those
that are selected by the symbol "=". You can change only single texts, it is not
possible to add or delete commands. After the file has been uploaded, the commands
will be displayed and arranged in the table according to their number.
If you wish to modify a command, click the given command and edit it, and the
change will be made after clicking
ENTER
button.
If you select the command containing text parameters, for example temperature units
InputUnit
, the text of parameters will be displayed n the right window, and these
parameters can also be modified.
The column
Right
means access rights, if
A
- Admin is assigned, only the
Administrator is allowed to use the commands, in case this number has been selected,
if not, then any user can use them.