Cancelling the TAMPER SETTING
Pressing BACK at any time in this process will return you to
normal operating mode
Press ENTER twice
Press ENTER
The following
message will appear
'Enter first digit'
The following
message will
appear 'To enter
release code press
ENTER'
Repeat the
previous step for
the second, third
and fourth digits
Press '-' or '+' to
confirm the first
digit of the release
code, then press
ENTER
The following
message will appear
'Tamper Code
Cleared'
22
SET UP Z-WAVE
The SR303 receiver unit receives the Z-
Wave radio signals from the CS317
programmable room thermostat. In the
unlikely event of a communication failure
it is possible to override the system and
switch On and Off using the On/Off
buttons on the SR303 receiver as a local
override.
